insulated mixing tank 500L (electric heating tank made of stainless steel SS304)
(1.5KW, 36rpm, 24KW heating emelemts)
- 500L heating and mixing capacity
- Made of SS304 (SS316 is available if needed)
- With 1.5 kw motor (China famous brand or Siemens, ABB brand)
- Different mixing speeds are available: 36rpm, 60rpm, 80rpm, 100rpm, 200rpm, 20~100rpm, 40~200rpm, 100~1000rpm or VFD control
- Use 220V 3phase AC (customized for 220V, 380V and 415V)
- Tri wall structure <inner layer, jacket. and insulation wall>
- With lifting lugs on the top (optional)
- With thermometer 0~150degree
- with discharge butterfly valve
- Electric heating power 6~24KW
G-FL is the name of a series of mixing tanks / blending tanks with similar structure descriped as below:
- Flange connection type with sealed cover (dish head mixing tank)
- Be able to bear high pressure (pressure vessel / pressure pot)
- Be able to used together with vacuum pump (used as Vacuum pressure impregnating tank)
- Top mount Mixing agitator
- Standard mixing speed (36rpm, 60 rpm, 2800rpm)
here below is the picture of our G-FL series mixing tanks.
the tank you see in this picture in fact is a 500L capacity one. for 100L electric heating mixing tank, 200L mixing tanks and any other different capacity ones, the tank structure keep the same just with different tank dimension.
100L electric heating tank specification G-FL
Serial No. I 0.5T E 304 P
Explanation of the serial No.
I - Insulated tank structure
0.5T - 500Liter tank capacity
E - Electric heating type
304 - Tank construction material
P - Propeller type mixing agitator
100L electric heating tank mixing tank specification
| Capacity |
500Liter |
Notes & Tips |
| Made by |
SS304 |
Food grade Stainless steel |
| Structure |
Tri-wall structure |
- Inner wall mirror polish
- Jacketed used to hold heating oil and electric heating elements
- Outer wall matt finished
|
| Thickness |
Inner wall 3mm
Jacket 3mm
Outer wall 1.5mm |
| Diameter |
Inner diameter 900mm
Outer diameter 1100mm |
- 2'' thermal insulation material between jacket and the outer wall
|
| Cylindrical part depth |
600mm |
Total depth 675mm |
| Drainage pipe height |
300mm to ground |
Sufficient space for pipes and fittings installation and maintenance |
| Over all height |
~1950mm |
|
| Heating power |
24KW |
2 groups on/off control |
| Power supply needed |
220V 60Hz 3phase AC |
Customized |
| Motor power |
1.5KW |
|
| Mixing speed |
36rpm |
Faster speed is available if needed |
| Agitator type |
Paddle |
|
| Pump flow rate |
3T/H |
(optional) Centrifugal pump or in-line shear pump are all available. |
| Pump power |
0.75KW |
| Discharge pipe |
1 inch clamp type connection |
|
| Inlet pipe |
1 inch external thread |
Customizer |
| Heating fluid inlet pipe |
Female thread 3/4" |
Heating fluid can be tap water or heat transfer oil |
| Accessories |
3 T centrifugal pump --- 1pc
Butterfly valve --- 3pcs
90degree bend --- 1pcs
SS pipes --- 3m
Temp. controller --- 2pcs
Temp. probe --- 2pcs |
The accessories listed here are the real case for a buyer. For your order, the accessories may not the same. |
500L electric heating blending tank construction material
Most of our high pressure mixing vessels are
made of stainless steel material. SS304 (SUS304) and SS316 (SUS316) are widely used in our high pressure mixing vessels.
Usually for small capacity high pressure mixing vessels, such as 200L high pressure mixing vessel, 300L high pressure mixing vessel or a 500L ones, our standard wall thickness will be 3mm. All our offer for high pressure mixing vessels are based on standard thickness. Offer for Customized high pressure mixing vessels not being included.
Details of our blending tanks and mixing vessels
Temperature control of our G-FL series high pressure mixing vessel
Temperature can be controlled as per request. Steam heating type mixing vessel usually use program to regulate the heating temperature. Electric heating type mixing vessel use low voltage apparatus components to regulate the heating temperature. When being used as chemical reaction kettle, the high pressure reaction kettle can bear at most 450 Degree Celsius (450
ºC / 842
ºF). The working pressure (in tank jacket) can be 0.25Mpa (2.5bar or 29psi).
Heating mode of our G-FL mixing tank
Tips on the electric heating blending tank price
The G-FL series high pressure mixing tank / mixing vessel usually customized according to the construction material (SS304 or SS316) and the working pressure, the mixing tank price(s) you found in this site may not be the correct price for the mixing tank that you need.
Words in the End
Your feedback is more than important to us.
Please be noted that we aim to provide exceptional service and care to every customer we work with, and we truly appreciate you taking the time to tell us about your idea on above product details.
If you would like to talk to us directly, please call and ask to speak with Tonny Cheng.
We are ready to answer your call and questions anytime.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}