Cheapest Centrifugal Pump 10 Ton Per Hour

• Customization: Available
• Max.Head: 10-30m
• Max.Capacity: 50-100 L/min
• Model NO.: 3T pump
• Driving Type: Motor
• Impeller Number: Single-Stage Pump
• Working Pressure: Middle Pressure Pump
• Influent Type of Impeller: Single Suction Pump
• Position of Pump Shaft: Horizontal Pump
• Pump Casing Combined: Horizontal Split Pumps
• Mounting Height: Suction Centrifugal
• Impeller: Open
• Usage: Circulating Pump
• Transport Package: Wooden Case
• Specification: 3T/H, 25m lift, 0.75kw
• Trademark: Ranking
• HS Code: 8413701090
• Production Capacity: 5000PCS Per Month

Product Description

10T/H beer centrifugal pump sanitary pump specificationplease contact our on line service team for the latest price or price list

Centrifugal Pump Description

In food and beverage plant, typical pumps are the centrifugal, liquid-ring and positive displacement pumps. The three types have different applications. 
The centrifugal pump is the type most widely used in dairies. Centrifugal pump is mainly used for low-viscosity products such as milk, juice and wine.

 

Structure

Main parts of a centrifugal pump

No. Main parts description No. Main parts description

1 Delivery line (liquid outlet port) 6 Back plate

2 Shaft seal 7 Motor shaft

3 Suction line (liquid inlet port) 8 motor

4 Impeller 9 Stainless steel cover and sound insulation

5 Pump casing

Pumping principle

The liquid entering the pump is directed to the center (eye) of the impeller and is set in circular motion by the impeller vanes, as shown in the picture below. As a result of the centrifugal force and the impeller motion, the liquid leaves the impeller at a higher pressure and velocity than at the impeller eye. The velocity is partly converted into pressure in the pump casing before the liquid leaves the pump through the outlet connection. The impeller vanes form channels in the pump. The vanes are normally curved backward, but may be straight in small pumps.

The shaft seal is often the most sensitive component in a pump, as it must seal between a rotating part, impeller or shaft, and a stationary part, the pump casing. Normally a mechanical seal is used.

In a mechanical seal the stationary seal ring is fastened to the back plate of the pump casing. The rotating ring can be fitted inside or outside the pump and is sealed with an O-ring. The rotating ring can move along the shaft and is pressed against the stationary ring by a spring.

Specification 

Main specification for 1~5HP pump

Model Flow

(t/h) Lift(m) Motor power In/outlet

(mm) Unit price Material

CP-10-24 10 24 2.2kw / 3HP 51 / 38 650 usd SS304

* All prices are subject to change without notice. Price valid 60 days.