stainless steel plate heat exchanger with 57 heat exchanger plate
A plate heat exchanger is a type of heat exchanger that uses metal plates to transfer heat between two fluids. This has a major advantage over a conventional heat exchanger in that the fluids are exposed to a much larger surface area because the fluids spread out over the plates. This facilitates the transfer of heat, and greatly increases the speed of the temperature change. Plate heat exchangers are now common and very small brazed versions are used in the hot-water sections of millions of combination boilers. The high heat transfer efficiency for such a small physical size has increased the domestic hot water (DHW) flow rate of combination boilers. The small plate heat exchanger has made a great impact in domestic heating and hot-water. Larger commercial versions use gaskets between the plates, whereas smaller versions tend to be brazed.
stainless steel plate heat exchanger with 57 heat exchanger plate
The concept behind a heat exchanger is the use of pipes or other containment vessels to heat or cool one fluid by transferring heat between it and another fluid. In most cases, the exchanger consists of a coiled pipe containing one fluid that passes through a chamber containing another fluid. The walls of the pipe are usually made of metal, or another substance with a high thermal conductivity, to facilitate the interchange, whereas the outer casing of the larger chamber is made of a plastic or coated with thermal insulation, to discourage heat from escaping from the exchanger.
stainless steel plate heat exchanger with 57 heat exchanger plate
The plate heat exchanger (PHE) was invented by Dr Richard Seligman in 1923 and revolutionised methods of indirect heating and cooling of fluids. Dr Richard Seligman founded APV in 1910 as the Aluminium Plant & Vessel Company Limited, a specialist fabricating firm supplying welded vessels to the brewery and vegetable oil trades.
stainless steel plate heat exchanger with 57 heat exchanger plate
Plate Heat Exchanger
a 12 square meter plate heat exchanger
this heat exchanger have 57 exchanger plate , each plate have 0.22 square meter heat exchange area.
you can use this plate heat exchanger cooling 1500L 35 degree C hot water to 3 degree C in hour hour's time using 0 degree glycol water
here below is the 12 M2 plate heat exchanger specification in detail
| Used to cooling 1.5T/H 35ºC CSD to 3ºC by 0 degree ice water <0ºC 1.5T/H> |
| Hot side liquid inlet |
ºC |
35 |
| Hot side liquid outlet |
ºC |
3 |
| Cold side liquid inlet |
ºC |
0 |
| Cold side liquid outlet |
ºC |
32 |
| Flow rate for hot side liquid |
T/H |
1.5 |
| Flow rate for cold side liquid |
T/H |
1.5 |
| Average temperature difference |
Δt |
3 |
| Chosed K value |
|
1500 |
| Actual values of K |
cal/m2 °c |
1449 |
| Single plate heat exchange area |
m2 |
0.22 |
| Total heat transfer area |
m2 |
12 |
| Hot liquid flow rate in PHE |
M/S |
0.2 |
| Cold liquid flow rate in PHE |
M/S |
0.2 |
| Designed pressure |
MPa |
0.5 |
| Test pressure |
MPa |
0.75 |
| Theoretical Weight |
KG |
250 |
| Non-contact part material |
Covered by SS304 |
| Contact part material |
SUS304 |
| Gasket material |
NBR |
| Connection type and pipe size |
Tri-clamp φ38 |
| |
|
in order to offer you a suitbale plate heat exchanger, we need to know the following details
1. what kind of liquid you are going to heat or cool in this plate heat exchanger
2. what kind of liquid you are going to use for cooling or heating in this plate heat exchanger
3. what is the hot side liquid inlet temperature for this plate heat exchanger
4. what is the cold side liquid inlet temperature for this in this plate heat exchanger
5. what is the hot side liquid flow rate when pass through the plate heat exchanger
6. what is the cold side liquid flow rate when pass through the plate heat exchanger
7. what is the pressure for the hot liquid when it was injected into the heat exchanger
8. what is the target temperature you want to get after yoru product pass through this plate heat exchanger
the above questions are very importent because they will help us know your reqeust well and than we can offer you the suitable plate heat exchanger. you know, a suitable plate heat exchanger will save your cost.
it is unnecessary to list all the ansers when you want to get a quote for a plate heat exchanger, 3 to 5 answers will be good enough.
stainless steel plate heat exchanger with 57 heat exchanger plate
please be noted that we are professional supplier of plate heat exchanger, we do not want to offer you a plate heat exchanger by random. only after we know your request well can we offer you a suitable plate heat exchanger.
| Common gasket for plate heat exchanger and the Max temperature the gasket can bear |
| NBR |
120 degree C |
| EPDM |
160 degree C |
| FKM |
250 degree C |
if you know how many square meter heat exchanger area, that is very good, and we can offer you a price immediately after get the heat exchanger area.
stainless steel plate heat exchanger with 57 heat exchanger plate
Words in the End
Your feedback is more than important to us.
Please be noted that we aim to provide exceptional service and care to every customer we work with, and we truly appreciate you taking the time to tell us about your idea on above product details.
If you would like to talk to us directly, please call 0086 180 7213 8651 and ask to speak with Tonny Cheng.
We are ready to answer your call and questions anytime.
offer plate heat exchanger with different heat exchanger area
Audited Supplier 
stainless steel plate heat exchanger with 57 heat exchanger plate
){kind=link}