Certification: | CE, ISO |
---|---|
Application: | Heater, Cooler |
Principle: | Plate Type Heat Exchanger |
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
plate material | Stainless steel(SUS304,316L etc ),Titanium and palladium |
gasket material | NBR:(applicable temperature -15-+120ºC) HNBR: (applicable temperature -15-+140ºC) EPDM: (applicable temperature -25-+150ºC) HEPDM: (applicable temperature -25-+170ºC) Viton/FPM: (applicable temperature -5-+180ºC) NEOPREKE: (applicable temperature -5-+130ºC) VNQ: (applicable temperature -65-+250ºC) |
Thickness of plate | 0.5mm |
Features |
Cost effective and lower operation cost |
Compact structure, easy installation |
Thin plate High heat exchange coefficient Less lag solution |
Less weight | Only 20-30% weight of shell-tube heat exchanger |
Less water consumption | High thermal efficiency allows BPHE only 1/3 of cold water consumption of shell-tube exchangers. |
Durable | Up to200°C temperature and 45 bar pressure No corrosion Eliminating gasket |
Minimal Fouling | The greatest turbulence in the flow results in less fouling and fewer cleaning |
High Quality | Jiangxing is recognized as the best heat exchanger producer in domestic market with years of operation experience and accurate computer aided design. |
Used to cooling 1.5T/H 35ºC CSD to 3ºC by 0 degree ice water <0ºC 1.5T/H> | ||
Hot side liquid inlet | ºC | 35 |
Hot side liquid outlet | ºC | 3 |
Cold side liquid inlet | ºC | 0 |
Cold side liquid outlet | ºC | 32 |
Flow rate for hot side liquid | T/H | 1.5 |
Flow rate for cold side liquid | T/H | 1.5 |
Average temperature difference | Δt | 3 |
Chosed K value | 1500 | |
Actual values of K | cal/m2 °c | 1449 |
Single plate heat exchange area | m2 | 0.22 |
Total heat transfer area | m2 | 12 |
Hot liquid flow rate in PHE | M/S | 0.2 |
Cold liquid flow rate in PHE | M/S | 0.2 |
Designed pressure | MPa | 0.5 |
Test pressure | MPa | 0.75 |
Theoretical Weight | KG | 250 |
Non-contact part material | Covered by SS304 | |
Contact part material | SUS304 | |
Gasket material | NBR | |
Connection type and pipe size | Tri-clamp φ38 | |
stainless steel plate heat exchanger stainless steel plate heat exchanger 20M2 |
Common gasket for plate heat exchanger and the Max temperature the gasket can bear | |
NBR | 120 degree C |
EPDM | 160 degree C |
FKM | 250 degree C |
Suppliers with verified business licenses