200L stainless steel heating mixing tank liquid detergent high shear mixer
- 200L heating and mixing capacity
- Made of SS304 (SS316 is available if needed)
- With 1.1 kw motor (China famous brand or Siemens, ABB brand)
- Different mixing speeds are available: 36rpm, 60rpm, 80rpm, 100rpm, 200rpm, 20~100rpm, 40~200rpm, 100~1000rpm or VFD control
- Use 220V 3phase AC (customized for 220V, 380V and 415V)
- Tri wall structure <inner layer, jacket. and insulation wall>
- With lifting lugs on the top (optional)
- With thermometer 0~150degree
- with discharge butterfly valve
- Electric heating power 4~16KW
G-FL is the name of a series of mixing tanks / blending tanks with similar structure descriped as below:
- Flange connection type with sealed cover (dish head mixing tank)
- Be able to bear high pressure (pressure vessel / pressure pot)
- Be able to used together with vacuum pump (used as Vacuum pressure impregnating tank)
- Top mount Mixing agitator
- Standard mixing speed (36rpm, 60 rpm, 2800rpm)
here below is the picture of our G-FL series mixing tanks.
the tank you see in this picture in fact is a 500L capacity one. for 100L electric heating mixing tank, 200L mixing tanks and any other different capacity ones, the tank structure keep the same just with different tank dimension.
200L stainless steel heating mixing tank high shear mixer mixing tank for wax
Serial No. I 0.2T E 304 P
Explanation of the serial No.
I - Insulated tank structure
0.2T - 200Liter tank capacity
E - Electric heating type
304 - Tank construction material
P - Propeller type mixing agitator
200L heating mixing tank specification
| Capacity |
200Liter |
Notes & Tips |
| Made by |
SS304 |
Food grade Stainless steel |
| Structure |
Tri-wall structure |
- Inner wall mirror polish
- Jacketed used to hold heating oil and electric heating elements
- Outer wall matt finished
|
| Thickness |
Inner wall 3mm
Jacket 3mm
Outer wall 1.5mm |
| Diameter |
Inner diameter 700mm
Outer diameter 900mm |
- 2'' thermal insulation material between jacket and the outer wall
|
| Cylindrical part depth |
350mm |
Total depth 700mm |
| Drainage pipe height |
300mm to ground |
Sufficient space for pipes and fittings installation and maintenance |
| Over all height |
~1750mm |
|
| Heating power |
16KW |
2 groups on/off control |
| Power supply needed |
220V 60Hz 3phase AC |
Customized |
| Motor power |
1.1KW |
|
| Mixing speed |
36rpm |
Faster speed is available if needed |
| Agitator type |
Paddle |
|
| Pump flow rate |
3T/H |
(optional) Centrifugal pump or in-line shear pump are all available. |
| Pump power |
0.75KW |
| Discharge pipe |
1 inch clamp type connection |
|
| Inlet pipe |
1 inch external thread |
Customizer |
| Heating fluid inlet pipe |
Female thread 3/4" |
Heating fluid can be tap water or heat transfer oil |
| Accessories |
3 T shear pump --- 1pc
Butterfly valve --- 3pcs
90degree bend --- 1pcs
SS pipes --- 3m
Temp. controller --- 2pcs
Temp. probe --- 2pcs |
The accessories listed here are the real case for a buyer. For your order, the accessories may not the same. |
500L electric heating blending tank construction material
Most of our high pressure mixing vessels are
made of stainless steel material. SS304 (SUS304) and SS316 (SUS316) are widely used in our high pressure mixing vessels.
Usually for small capacity high pressure mixing vessels, such as 200L high pressure mixing vessel, 300L high pressure mixing vessel or a 500L ones, our standard wall thickness will be 3mm. All our offer for high pressure mixing vessels are based on standard thickness. Offer for Customized high pressure mixing vessels not being included.
Details of our blending tanks and mixing vessels
Temperature control of our G-FL series high pressure mixing vessel
Temperature can be controlled as per request. Steam heating type mixing vessel usually use program to regulate the heating temperature. Electric heating type mixing vessel use low voltage apparatus components to regulate the heating temperature. When being used as chemical reaction kettle, the high pressure reaction kettle can bear at most 450 Degree Celsius (450
ºC / 842
ºF). The working pressure (in tank jacket) can be 0.25Mpa (2.5bar or 29psi).
Heating mode of our G-FL mixing tank
G-FL series high pressure vessel can be 200L, 300L, 500L or 800L. In our past experiences, G-FL series high pressure mixing tanks usually have a small capacity which is no more than 1000Liter (264 Gallon). Most of them
use electric / oil as heating medium. So some of our buyers call this kind of blending tank as
oil jacket pressure vessel or
oil jacketed mixing tank.
Steam vapor is also widely used in high pressure vessel while gas heating tank is not as popular as steam and electric heating mixing tanks.
Like our G-SI series dimple jacket mixing tank and G-SC series conical bottom mixing tank as well as the G-SE series dish end mixing tank, G-FL series high pressure vessel can also use dimple jacket and spiral coil for cooling and heating.
Cooling function for stainless steel high pressure mixing vessel
Some users need a cooling process after heating. It is depends on your usage of this tank.
if you use oil as heating medium, you will need to do the cooling process outside of this blending tank.
if you use water as heating agent in the jacket, cooling process can be down in this water heating tank.
cooling for some other type of mixing tank:
Dimple jacketed mixing vessel mainly used in heating process. If cooling process needed, a coil jacket will be high recommended. Our skilled and experienced workers will weld the coil to the high pressure mixing vessel body (outside of the high pressure mixing vessel's inner wall). User access the cooling medium such as ice water, cool water or glycol water into the coil, when the cooling medium pass through the cooling coil, the content in the cooling tank will be reduced rapidly. High pressure mixing vessel with spiral coil is widely called as spiral coil high pressure mixing vessel, or cooling high pressure mixing vessel.
Quality control of our mixing tank
we pay more atttention on quality control. and we have our own Q.C. department. In order to make sure all the quality is our highest quality level, our General Manager joined to Q.C. department and act as a Q.C. inspector.
This is usefull----- All workers in each production position will pay special attention to the every production details which lead to a high quality finished tank! Even like this, we still inspect every tank before packing, no mater the order quantity is 1pcs, 2pcs or 50pcs 100pcs.
we inspect every equipment that we produce in order to make sure every product we send out with suitable performance.
Packing and package of our stainless steel mixing tank heating tank
this picture below is a 100Liter electric heating tank with agitator, 36rpm mixing speed, used for chemical product: soap and washing liquid (lotion production). you can see from this picture:
1. before packing, we cleaning the tank surface completely including corners where you may not see.
2. pack the tank with wrapping film
3. pack the tank with another layer of packing material to protect the tank from any potential scratch
4. packing the tank in wooden package.
Tips on the electric heating blending tank price
The G-FL series high pressure mixing tank / mixing vessel usually customized according to the construction material (SS304 or SS316) and the working pressure, the mixing tank price(s) you found in this site may not be the correct price for the mixing tank that you need.
Words in the End
Your feedback is more than important to us.
Please be noted that we aim to provide exceptional service and care to every customer we work with, and we truly appreciate you taking the time to tell us about your idea on above product details.
If you would like to talk to us directly, please call 0086 180 7213 8651 and ask to speak with Tonny Cheng.
We are ready to answer your call and questions anytime.
){kind=link}