Milk Cooling Tank 1500 Liter U Shape

• Customization: Available
• Process: Thermal Processing
• Power Source: Electric
• Model NO.: MCT-1.5TU
• Certification: CE, ISO9001
• Automatic Grade: Automatic
• Application: Milk, Yogurt, Cheese
• Customized: Customized
• Cooling Tank Capacity: 300L ~ 150, 000liter
• Cooling Device: Copeland, Bitzer, Danfoss
• Cooling Power: 2HP ~ 24HP
• Temperature Range: 2~40 Degree C
• Evaporator Type: Direct Expansion
• Mixing Speed: 25rpm
• Mixing Mode: Manual and Automatic Control
• Power Supply: 220V 60Hz 3phase / 380V 50Hz 3phase
• Thermal Insulation: 50~80mm PU
• Transport Package: Wooden / Nylon
• Specification: 300~150, 000Liter
• Trademark: ranking
• Origin: China
• HS Code: 8434200000
• Production Capacity: 2000 Sets Every Season

Product Description

U shape milk cooler cooling milk tank 2000Liter (U shape milk cooling tank capacity should not above 3000Liter)
Technical Specification of Milk Chilling Tank 1000L / 2000L
milk cooling tank capacity can be customized. here below is the specification of our 1000Liter milk cooling tank.
Bulk Milk Cooler (1,500 litres):

A	Basic Design Parameters
	Parameters	Standard Value
I	Milk storage (Rated) capacity	1.500 litres (Customized)
ii	Maximum cooling temperature range	Milk can be cooled from 35^0C to 2 or 4^0C
iii	Maximum cooling time	Total capacity milk can be cool down from 35^0C to 3^0C to 4^0C within 2 to 3 hours.
iv	Connected power	380V -3phase / 220V 3phase
v	Ambient temperature considered when design	43degree C

 

B	Tank and Evaporator
The bulk milk cooling unit is designed to cool raw milk at milk farm and dairy processing plant to conserve the quality of milk. It is a hygienic container built to sanitary standard. Tank inner, outer, bottom dimpled jacket are all made of SS 304 material and welded with TIG process. The inner shell & all other milk contact surfaces are polished up to minimum 150 grid finish (standard). (200 and 240 grid finish optional) The evaporator will be dimpled pressed plate Jacket put at the bottom plate of the inner tank. Optimum design with large evaporation surface area for rapid and problem-free cooling at all volumes of milk. All connecting pipes terminating outside the tank are of SS construction.  Horizontal Milk Cooling Tank should have a top manhole cover with locking arrangement for inspection. Milk inlet and outlet pipe use tri-clover clamp. 360^0 spray ball for easy cleaning.  Agitator designed to be automatic control and manual control.
I	Manufacture	Wenzhou RANKING
ii	Rated capacity	1,500Liter
iii	Brand name	RANKING
iv	Model	MCT-1.5
v	Construction material	AISI 304
vi	Shape & Orientation	Horizontal Cylindrical Close type with man way
vii	Number of Agitator	01
viii	RPM of agitator	25rpm ~30rpm
ix	Position & shape of agitator blade	The position and shape of agitator bladed such that even small quantities of milk should be gentle stirred without danger of freezing
x	CIP facility	Cleaning & rinsing by self-rotating spray ball at the top portion of the tank with the help of existing balance tank & stainless steel centrifugal pump.
xi	Manhole and ladder	For milk cooling tanks with less than 3T capacity, ladder is optional. For 5T and 10,000litres milk cooling tanks manhole and  stainless steel ladder are standard.
xii	Wall Thickness of inner shell	2mm
xiii	Wall Thickness of outer shell	0.9mm
xiv	Thermal insulation
		Injected polyurethane foam (PUF)
	Thickness	50mm (Minimum)
	Density	40kg/m3
	Efficiency	The insulation efficiency is such that the rise of milk temperature initially at 4.C don't exceed 1"C during 12 hours with the rated volume of milk not being stirred and room temperature 25 .C as per requirement of ISO 5708.
xv	Facility to measure the milk volume	Glass level meter
xvi	Tank legs	Stainless steel legs with adjustable foot pad
xvii	Milk outlet	Through specially designed lockable 51mm butterfly valve and terminating in clamp end connection
xviii	Overall dimension of tank	Pls contact with Mr. Cheng at
xix	weight

C	Refrigeration unit
The refrigeration system is designed with adequate capacity to chiIl the milk as per basic design parameter with multiple condensing units. Each condensing unit consists of the compressor, condenser, receiver, dryer, expansion valve, high-pressure cut out, low-pressure cut out, solenoid valve, sight glass, oil separator and other controls suitable for smooth operation of the plant. We offer related refrigerant pipes, fittings for interconnection of all refrigeration components. All refrigerant pipes will be properly clamped on fixed support and sponge insulation for protection. There should have shut off valve both sides of compressor, receiver & dryer.
I	Refrigeration system	Direct expansion
ii	Compressor type	Hermetically sealed reciprocating
iii	Brand name of compressor	Copeland
iv	Model	MCT-1.5
v	Number of compressor	1 Nos.
vi	Origin	USA
vii	Cooling capacity of Compressor at 0'C evaporating & 50"C condensing temp. (Kcal/hr.)	6000
viii	Condensers type	Air cooled, screen protected, included draft type, 100% copper tube
ix	Receiver size and capacity	2~5litres
x	Thermostatic Expansion valve	Any reputed brand
xi	Type of refrigerant	Environment friendly

D	Electric control panel
The control panel will be dust and vermin proof design in stainless steel enclosure suitable for mounting on the wall/cooling tank. The panel will pre wired to terminal connections and will comprise of the following:
I	In coming MCB to receive power from main power line.
ii	Voltmeter and ammeter with selector switch for monitor the main supply voltage and currant of every phase. (for old design only)
iii	Line voltage controller to protect the compressor against voltage supply fluctuation.
iv	Phase failure prevention.
v	Sequential controller with timer delay arrangement to avoid sugar on power supply.
vi	Individual MCB fir every motor.
vii	Selector switch for selecting operation of agitators on auto or manual arrangement
viii	Digital temp. controller and indicator with display (0~100 ^0C)
ix	Electrical wiring of power and control line between Electrical Control Panel to compressors, condenser fans, pump and other equipment will be done by supplier's engineer including supply of adequate size electrical power and control cables.

2. Balance tank (optional)

Milk Revering Tank should be made of stainless steel AlSl 304 grade with adjustable legs, can tipping bar, milk outlet with butterfly valve (38mm) and inline stainless steel (AlSl 304) filter unit. capacity : 200 litres (min)

 
3. Milk pump (optional)

To pump raw milk from the balance tank to the cooling tank and chilled milk from the cooling tank to the milk carrying tanker as well as help for CIP of whole plant. Pumps housing and motor will be separated by a self-adjusting rotary seal. Pump casing, impeller and shaft seal will be made of acid & caustic proof stainless steel. It will be included a DOL starter for start and stop of the pump. Each pump should have 3 sets of shaft seal as spare. Capacity: 3,000L/H

Milk cooling tank bulk milk cooler On line service 
If you would like to talk to us directly, please call   and ask to speak with Tonny Cheng.
We are ready to answer your call and questions anytime. 

Offer bulk milk cooling tank 200~1000Liter (U shape milk cooler, open top milk cooling tank), bulk milk cooler and milk storage equipment